ThermalContactBCsAction

under construction:Undocumented Class

The ThermalContactBCsAction has not been documented, if you would like to contribute to MOOSE by writing documentation, please see Documenting MOOSE. The content contained on this page explains the typical documentation associated with an action; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

!syntax description /ThermalContact/ThermalContactBCsAction

Input Parameters

  • variableThe variable for thermal contact

    C++ Type:NonlinearVariableName

    Options:

    Description:The variable for thermal contact

  • slaveThe slave surface

    C++ Type:BoundaryName

    Options:

    Description:The slave surface

  • masterThe master surface

    C++ Type:BoundaryName

    Options:

    Description:The master surface

Required Parameters

  • gap_geometry_typeGap calculation type.

    C++ Type:MooseEnum

    Options:PLATE CYLINDER SPHERE

    Description:Gap calculation type.

  • save_inThe Auxiliary Variable to (optionally) save the boundary flux in

    C++ Type:std::vector

    Options:

    Description:The Auxiliary Variable to (optionally) save the boundary flux in

  • disp_zThe z displacement

    C++ Type:std::vector

    Options:

    Description:The z displacement

  • disp_yThe y displacement

    C++ Type:std::vector

    Options:

    Description:The y displacement

  • disp_xThe x displacement

    C++ Type:std::vector

    Options:

    Description:The x displacement

  • warningsFalseWhether to output warning messages concerning nodes not being found

    Default:False

    C++ Type:bool

    Options:

    Description:Whether to output warning messages concerning nodes not being found

  • min_gap1e-06A minimum gap (denominator) size

    Default:1e-06

    C++ Type:double

    Options:

    Description:A minimum gap (denominator) size

  • appended_property_nameName appended to material properties to make them unique

    C++ Type:std::string

    Options:

    Description:Name appended to material properties to make them unique

  • max_gap1e+06A maximum gap (denominator) size

    Default:1e+06

    C++ Type:double

    Options:

    Description:A maximum gap (denominator) size

  • cylinder_axis_point_1Start point for line defining cylindrical axis

    C++ Type:libMesh::VectorValue

    Options:

    Description:Start point for line defining cylindrical axis

  • quadratureFalseWhether or not to use quadrature point based gap heat transfer

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not to use quadrature point based gap heat transfer

  • inactiveIf specified blocks matching these identifiers will be skipped.

    C++ Type:std::vector

    Options:

    Description:If specified blocks matching these identifiers will be skipped.

  • emissivity_10The emissivity of the fuel surface

    Default:0

    C++ Type:double

    Options:

    Description:The emissivity of the fuel surface

  • sphere_originOrigin for sphere geometry

    C++ Type:libMesh::VectorValue

    Options:

    Description:Origin for sphere geometry

  • emissivity_20The emissivity of the cladding surface

    Default:0

    C++ Type:double

    Options:

    Description:The emissivity of the cladding surface

  • active__all__ If specified only the blocks named will be visited and made active

    Default:__all__

    C++ Type:std::vector

    Options:

    Description:If specified only the blocks named will be visited and made active

  • cylinder_axis_point_2End point for line defining cylindrical axis

    C++ Type:libMesh::VectorValue

    Options:

    Description:End point for line defining cylindrical axis

  • orderFIRSTThe finite element order

    Default:FIRST

    C++ Type:MooseEnum

    Options:CONSTANT FIRST SECOND THIRD FOURTH

    Description:The finite element order

  • displacementsThe displacements appropriate for the simulation geometry and coordinate system

    C++ Type:std::vector

    Options:

    Description:The displacements appropriate for the simulation geometry and coordinate system

Optional Parameters

References