www.mooseframework.org
Classes | Functions
IdealGasFluidPropertiesPT.h File Reference

Go to the source code of this file.

Classes

class  IdealGasFluidPropertiesPT
 Ideal gas fluid properties for (pressure, temperature) variables. More...
 

Functions

template<>
InputParameters validParams< IdealGasFluidPropertiesPT > ()
 

Function Documentation

template<>
InputParameters validParams< IdealGasFluidPropertiesPT > ( )

Definition at line 12 of file IdealGasFluidPropertiesPT.C.

13 {
14  InputParameters params = validParams<SinglePhaseFluidPropertiesPT>();
15  params.addParam<Real>("molar_mass", 29.0e-3, "Constant molar mass of the fluid (kg/mol)");
16  params.addParam<Real>(
17  "thermal_expansion", 3.43e-3, "Constant coefficient of thermal expansion (1/K)");
18  params.addParam<Real>(
19  "cv", 0.718e3, "Constant specific heat capacity at constant volume (J/kg/K)");
20  params.addParam<Real>(
21  "cp", 1.005e3, "Constant specific heat capacity at constant pressure (J/kg/K)");
22  params.addParam<Real>("thermal_conductivity", 25.68e-3, "Constant thermal conductivity (W/m/K)");
23  params.addParam<Real>("specific_entropy", 6.85e3, "Constant specific entropy (J/kg/K)");
24  params.addParam<Real>("viscosity", 18.23e-6, "Constant dynamic viscosity (Pa.s)");
25  params.addParam<Real>("henry_constant", 0.0, "Henry constant for dissolution in water");
26  params.addClassDescription("Fluid properties for an ideal gas");
27  return params;
28 }
InputParameters validParams< SinglePhaseFluidPropertiesPT >()